LED Wall washer
LED Flood light
Linear bar light
LED Inground light
LED Pixel module
DA series pixel module
DA-30-01/LED Pixel Module:Programmable Lighting for Stunning Visual Effects and Customizable Designs
product detail
| Item | Structure | Power/PC | Features |
| DA-30-01 | IP65 structure waterproof | 1W |
CCT：RGBW/DMX512 LED：3030/3LED Beam angle：120° Voltage：DC24V LED Brand：Lumileds Body color：Dark Grey |
| DA-30-01 | IP65 structure waterproof | 1.2-1.5W |
CCT：RGBW/DMX512 LED：3030/4LED Beam angle：120° Voltage：DC24V LED Brand：Lumileds Body color：Dark Grey |
Technical Parameters
Technical Parameters
|
Lamp Parameter |
LED parameter |
|||
|
Beam Angle |
120° |
LED chip |
Cree CLX6E/2835 |
|
|
Cover and case material/color |
Imported PC/Black |
CCT |
Single color/RGB/RGBW |
|
|
IP rate |
IP66 structure waterproof |
LED life time |
50000 hours |
|
|
Power |
1W |
Other Parameter |
||
|
Input voltage |
24V DC |
Cable |
5pins rubber cable (power cable 1mm², signal cable 0.3mm²) |
|
|
Waterproof connector |
Φ16mm Aluminium alloy, Φ1.5mmGold Plated solid pin |
|||
|
Pixel |
ON-OFF or 1 pixel |
Cable length |
Customizing |
|
|
Irradiation angle |
Horizontal |
Installation clip |
aluminum |
|
|
Cable output |
From 2 ends |
Light distribution |
||
|
Series connection |
50pcs |
 |
||
|
Control system |
DMX512 |
|||
|
Environment Temperature |
-30°C~+35°C |
|||
|
Net weight |
100g |
|||
|
Certificated |
GB7000.1-2015；GB7000.201-2008 |
|||
Standard sizes
Light distribution
FAQs
What is a Pixel Module?
A point light source is a light source that emits light from a single point and is usually used to provide concentrated or decorative lighting.
What applications are point light sources suitable for?
Point light sources are widely used in indoor lighting, display lighting, landscape lighting, architectural lighting and other occasions to highlight specific areas or objects.
How to choose the appropriate point light source power?
The power of a point light source should be selected based on the lighting needs, the illuminated area and the required brightness, which is usually evaluated in lumens (lm).
How to choose the color temperature of a point light source?
The color temperature is measured in Kelvin (K). You can choose according to the environmental requirements. 3000K is suitable for a warm atmosphere, and 5000K is suitable for clear and bright lighting.